The Simes E Series irrigation fasteners and staples have been manufactures in Spain
to the highest possible standards. The staples are used when fastening irrigation
lines of varying diameters to wire in the orchard or vineyard.
Economy: 50% saving in manpower and tying materials. Specialised manpower not required
Endurance: up to 10 years
Tying Quality: the Simes E staple allows expansion and contraction of the pipe without
affecting the fastening strength and without slipping. Placed near the dripper it
ensures precise irrigation.
Placement: recommended placement of staples at half meter intervals along the pipes
Technical Information for E series Irrigation pliers, magazines and staples
Magazine / Staple
Simes Irrigation Fastener Model 140
Note: the Model 140 is supplied without magazine. It is necessary to purchase the
magazine/s separately as there are different magazines to suit E30, E40 and E 45
staples for the different size poly pipe as per the above table.
Magazines to Suit Model 140 Irrigation Fastener
Refer to the above technical table to select the appropriate magazine for your staple
and pipe size.
Simes model 150 irrigation fastener
The Simes model 150 irrigation fastener is supplied with magazine to suit E50 staples
for 21- 24mm irrigation pipe.
Simes model 155 irrigation fastener
The Simes model 155 irrigation fastener is supplied with magazine to suit E55 staples
for 25 - 28 mm irrigation pipe.
Staples to suit Simes E Series Irrigation Fasteners
Refer to the above technical table to select the appropriate staple size for your
tool and poly pipe size.